i2Systems Gen3 V3285, Installation Manual

www.i2systems.com

Integrated Illumination Systems, Inc.

355 Bantam Lake Road
Morris, CT  06763 USA 

tel +1.860.567.0708
fax +1.860.567.2501
sales@i2systems.com

Product information is subject to change without notice.
All brand names and product names are trademarks of i2Systems.
© 2012 i2Systems. All Rights Reserved.

Gen3

Installation Guide

Use these instructions to plan, install, and wire your new Gen3 Fixture. Proper installation will  
ensure this Fixture will provide superior linear architectural lighting with minimal maintenance 
and electric consumption for many years.

WARNING: Only a qualified electrician should install i2Systems products.

While it may be tempting to skip sections, we assure you that reading this material will help you 
to avoid problems and speed up the installation process.

  Introduction

3

•  Pick an accessible area that allows for future  

  maintenance and/or service of the Fixture
•  Review the temperature and environmental conditions  

  to ensure the Fixture operates within recommended  

  ratings as outlined in this guide

Review the 

installation 

site

•  Use the adjustable or fixed brackets to secure the  

  Fixture to the mounting surface
•  Connect multiple Fixtures in a run, if applicable

Install the 

fixture

•  Familiarize yourself with the Fixture,  

  Power Box, and associated accessories

Identify 

all parts

•  Use the wiring diagram that best describes your  

  installation criteria

Wire the 

fixture