Installation
9
Step 7
Replace the chassis cover and re-tighten the screws on both sides and on the rear panel of the chassis.
Front Panel
Indicator
Description
1 POWER
LED is red when power is ON
2 STATUS
LED is red when data is being read from or written to the HDD.
Applies only to models with the installed HDD.
3 Tx/Rx
1. LED of OFF when Annexxus 516 is not connected to the
network
2. LED blinks green when the data is being transmitted /
received;
3. LED blinks at higher frequency when the large amounts of
data are being transmitted/received.
Rear Panel
Indicator
Description
1 VIDEO IN
BNC connectors for analog video inputs (1-16)
2 LINE IN
3.5mm two-way audio interface; connect to active pick-up, microphone,
etc.
3 AUDIO OUT
3.5mm audio output interface; connect to audio output device, such as a
speaker, etc.
4 AUDIO IN
Line input interface for audio input. Audio Port number corresponds and is
hard-linked with the Video Port number. Make sure to connect audio inputs
to the corresponding video channels.
