Configuring Video Settings
Annexxus 516 Video Settings allow configuring main and sub-stream settings, resolution, video quality, frame rate, and
video encoding for each individual analog camera connected to the encoder.
While settings such as resolution and frame rate can be configured via SRX-Pro Server -> IP Camera setup page, main/sub
stream settings and encoding can only be configured through Web GUI. SRX-Pro Server relies on the Main/Sub Stream
settings as configured on Annexxus 516 Web GUI.
Note:
Video settings configured on Annexxus 516 also affects the video feeds recorded by SRX-Pro Server.
To access Annexxus 516 Video Settings,
1.
Open the encoder's interface
via the Web Browser
.
2.
Go to Configuration -> Camera Settings -> Video Settings menu
3.
Select the analog camera in the Channel No. drop-down menu
4.
In the Video Settings setup, configure the Main Stream settings.
a.
Select
Main Stream
under the Stream Type drop-down menu
b.
Set the Resolution, Video Quality, Frame Rate and Video Encoding from corresponding drop-down
menus.
5.
Next, configure the Sub Stream settings.
a.
Select
Sub Stream
under the Stream Type drop-down menu
b.
Set the Resolution, Video Quality, Frame Rate and Video Encoding from corresponding drop-down
menus.
6.
Copy the settings to as many analog cameras as you wish, by checking off corresponding camera checkboxes in
the bottom of the screen
7.
Click
Save
.
