11
Rev. 130411
i3-TRNG-CAMS-Ax51B.indd
Save
.
12. Wait a few moments as the new IP address is being applied to your Annexxus
camera. Wait for the following message to be displayed. Click
OK
to close it.
13. Repeat Steps 1-12 for all detected Annexxus cameras in the Annexxus Finder.
14. Now that the new IP address has been successfully assigned to your camera,
make sure you can connect to it through the Internet Explorer:
15. Launch Internet Explorer on your SRX-Pro Server and enter the IP Address you
have just assigned to your Annexxus camera. The password window should be
displayed.
16. Enter the default camera User Name:
admin
and default Password:
1234
17. Annexxus camera interface will be displayed in the Internet Explorer window.
You should be able to see the camera image on the screen.
