32
Security Users
This page provides an overview of the current users. Currently the only way to login as another user on the web server is to
close and reopen the browser.
To configure Security Users in the web interface:
Click Configuration / Security / Switch / Users
Click Add New User
Enter User Name parameter
Click Apply and click the Save icon in the upper right cornerto save the settings or click Reset to cancel. The Form
will return to the previously saved settings.
Security Users Configuration Parameters:
Items
Description
User Name
The name identifying the user. This is also a link to the Add / Edit User.
Password
Enter a password. The allowed string length is 0 to 255, and the allowed content are the
ASCII characters.
Privilege Level
The privilege level of the user. The allowed range is 1 to 15. If the privilege level value is 15,
it can access all groups, i.e. that is granted the fully control of the device. But other
values need to refer to each group privilege level. User's privilege should be same or
greater than the group privilege level to have the access of that group. By default
setting, most group privilege level is 5 which grants read-only access and privilege level 10
has the read-write access. And the system maintenance (software upload, factory defaults and
etc.) need user privilege level 15. Generally, the privilege level 15 can be used for an
administrator account, privilege level 10 for a standard user account and privilege level 5
for a guest account.
