i3 International i3B265i, Instruction Manual

11

CAMERA TEXT: 

Use ENTER to get into 

the submenu. When exiting the OSD 
menu, the text will be shown on the 
display. You can move the TEXT position 
to anywhere on the screen.

CAMERA TEXT MENU

TEXT POS                 <SET>
TEXT                        **********

                  ABCDEFGHIJKLM
                  NOPQRSTUVWXYZ
                  0123456789:<>
                       - . , ; x /

BACK              CLEAR

Move the cursor to the BACK/NEXT 

item. Press the ENTER button, choose 
the next page, last page or to exit the 
submenu.

Press the ENTER button to save all 

settings and exit.

• NEXT/BACK

• EXIT

DNR:

Move the cursor to the DNR set 

up item. Use the LEFT/RIGHT button to 
adjust the desired level of Digital Noise 
Reduction. You can choose LOW/MID/
HIGH.

MENU SETTING

 Remote

ADDRESS            001
BAUD RATE          4800
PROTOCOL           PELCO P
SOFT VER            X.X
                  
               SAVE   CANCEL  DEFAULT
         

Use ENTER to get into the submenu. 

Users can set up system information by 
pressing the dip switches in this menu, 
such as camera address, baud rate(1200, 
2400,4800,9600), protocol(Pelco P/D), 
and the software version will be shown 
as the last item. 

Press the ENTER button to reset back 

to the original settings.

    Press the ENTER button to recall the 
default settings.

• CANCEL

• DEFAULT

WITH IR LAMP:

Use enter to get into the 

submenu. Use the LEFT/RIGHT button, to 
choose YES or NO. 
*In an environment with extra IR lights, 
the ICR filter may hunt continually. If it 
occurs, turning this function to YES is 
able to fix this issue.
**The default setting is NO.

• REMOTE