System Setup > System Setting
Revision: 180906
Veo16i User Manual
Page | 61
Date/Time
<SYSTEM SETUP> - <SYSTEM> - <DATE/TIME>
All i3 international DVRs are set to EST - Eastern Time Zone (GMT-5:00).
The time zone of your DVR MUST be set to your local time zone on the first system start up and every
time the DVR is relocated to a different time zone.
>
DATE/TIME: Set the local time and date. Click the clock icon
to set the time/date manually.
>
DATE FORMAT: Set the date format. E.g. MM/DD/YYYY
>
TIME FORMAT: Set the time format to 12 HOUR (AM/PM) or 24 HOUR standard.
>
TIME SERVER: Enter the time server address to automatically sync DVR time with the preferred
Internet time server. Click the refresh icon
to perform the time sync.
>
AUTO TIME SYNC: Enable or disable automatic time synchronization with the time server by
setting this feature to ON or OFF.
>
SYNC AT: Set the time for automatic daily time sync. AUTO TIME SYNC must be enabled.
>
TIMEZONE: Set the DVR to your local time zone. Select your correct time zone from the drop-
down list. All i3 international DVRs are set to EST – Eastern Time Zone (GMT -5:00).
>
DST: If your locale follows Daylight Savings Time, set this feature to ON.
Click
APPLY
to save new configurations.
When done, click
CLOSE
or press [
EXIT
] on the remote control.