Intelligent Applications
Options in the video player menu
During playback, press “
OK
” to display the menu options shown above. Select the corresponding icon, and
press “
OK
” to execute the operation. User can press “
Back
” to exit playback, or press “
,
,
,
and ” on the remote control to perform shortcut operations.
Settings
Visible Password:
Show the password when entering the password
during PPPOE dial-up and wireless network connection.
Select
Visible Password
, and press “
OK
” to enable or
disable the function.
Network Settings:
Select
Network Settings
under Settings in the
intelligent mode, and press “
OK
”.
Wired Network Settings:
Prior to use of wired network, fi rst connect one end of the network cable to the network port on the
product, and the other end to the router.
1. If your router is set to allow automatically obtaining an IP address, select
Advanced Options > DHCP
for IP
Confi guration, and press “
OK
”; the product will automatically obtain an IP address.
2. If your router is not set to allow automatically
obtaining an IP address, you must complete network connection by the following steps (select
Static
in TP
confi guration);
3. Select
IP Address
, and confi gure an available IP address for the product;
4. Select
Default Gateway
, and confi gure an available gateway for the product;
5. Select
Network Prefi x
Valid Length, and confi gure a valid length of subnet mask for the product;
6. Select
Preferred DNS 1
and
Alternate DNS 2
, and confi gure an available DNS server address for the product;
7. Select
Save
, and press “
OK
”; the system will give a prompt indicating the setting is fi nished.
8. Select
Subnet Mask
, and confi gure an available subnet mask for the product;
9. Select
Default Gateway
, and confi gure an available gateway for the product;
Select
Network Prefi x Valid Length
, and confi gure a valid length of subnet mask for the product;
10. Select
Preferred DNS 1
and
Alternate DNS 2
, and confi gure an available DNS server address for the product;
11. Select
Save
, and press “
OK
”; the system will give a prompt indicating the setting is fi nished.
Play the previous chapter.
Select the fast rewind rate.
Pause/start video playback.
Select the fast forward rate.
Play the next chapter.
Select the viewing time point
View the playlist.
Display the details of a video
Playback settings; enable subtitle display and adjust audio track progress
with this option.
Set repeat play of the A-B segment. After setting points A and B, the A-B
segment of the video will be played repeatedly.
