EtherLan User Guide
*EHtest
I mmediate command
Forces a card self-test, on its current Ethernet port.
Syntax
*ehtest
Use
This is the EtherLan version of the DeviceTest command.
The EHtest command forces the EtherLan card to carry out its self-test procedures, as described in the section
Self Test and Cable Check.
The card tests only the Ethernet port to which it has self-configured, and displays infonnation about driver status
and activity in the same way as the EHinfo command. It is primarily provided as an aid to testing and trouble-
shooting.
Example
*EHtest
Diagnostic tests started
Diagnostic tests complete
EtherH Version
4.19 © i-cubed ltd. 1996
Card Info:-
i-cubed, EtherLan 600 Ethernet StrongARM interface
Unit 0, slot 8, 16-bit driver.
Ethernet address=00:c0:32:00:74:41
10Base2
(coax) interface in use.
I/O Stats:-
Rxframes=28, Rxerrs=0, Txframes=36, Txerrs=0, DMAframes=0
Collisions=0, Rejects=0
Frame Info:-
Type=8035 FrmLvl=1 AddrLvl=2 ErrLvl=O Handler=3a4d3ac
Type= 806 FrmLvl=1 AddrLvl=2 ErrLvl=O Handler=3a4d3ac
Type= 800 FrmLvl=1 AddrLvl=2 ErrLvl=O Handler=3a4d3ac
Controller Mode:- Multicast, reject frames with errors
Notes
See the notes for EHInfo, above.
Related Commands
'EHinfo
- 1 2-
