4
www.i3-learning.com
4
www.i3-learning.com
Precautions
Please follow all warnings, precautions and
maintenance as recommended in this user�s
guide.
▀
■
Warning- Do not look into the projector’s lens when the
lamp is on. The bright light may hurt and damage
your eyes.
▀
■
Warning- To reduce the risk of fire or electric shock, do not
expose this projector to rain or moisture.
▀
■
Warning- Please do not open or disassemble the projector
as this may cause electric shock.
▀
■
Warning- Before replacing the lamp, please have the projec-
tor completely cooled down. Operate as described
on Pages 48-49.
▀
■
Warning- This projector will automatically detect the service
life of its lamp. When the projecor shows a warn-
ing message, the lamp must be replaced “immedi-
ately”.
▀
■
Warning- After replacement of the lamp module, please
reset the lamp hour counter (see Page 49).
▀
■
Warning- When switching the projector off, please ensure
the cooling cycle has been completed before
disconnecting power. Allow 90 seconds for the
projector to cool down.
▀
■
Warning- When service life of the lamp is about to expire,
the “Lamp Warning: Exceed Service Life” message
will be shown on the screen. Please contact the lo-
cal dealer or service center to replace the lamp as
soon as possible.
When service
life of the lamp
expires, the lamp
module must
be replaced.
Otherwise, the
projector cannot
be switched on.
To replace the
lamp, please
follow the
steps stated in
“Replace the
Lamp” on Pages
48-49.
