6
IAdea PSP 2-Port True 4K Advanced HDMI Splitter Solution
Copyright© 2019 IAdea all rights reserved
Troubleshooting:
To ensure proper video outputs from the splitter, the user needs to make sure
the following splitter implementation requirements are satisfied:
1
2
1
2
3
Set to Full HD (1080p @ 60) - 12 bit 3D video & 7.1 CH audio
Set the DIP switch to "[pin1, pin2] = [
↑-↓]"
Restart the splitter.
Set to Learning EDID from output 1
Set the DIP switch to "[pin1, pin2] = [
↓-↓]"
Restart the splitter.
Splitter will automatically learn EDID settings.
1
2
3
Connected HDMI-compatible displays support Full HD videos.
Connected HDMI-compatible display with the lowest resolution must be
connected to HDMI-Out 1.
Restart the splitter after every adjustment made to the EDID DIP switch.
If the splitter continues to project inaccurate video outputs, even when the
requirements above are satisfied, the users are recommended to go through
the steps below to troubleshoot this issue.
Summary of Contents for PSP-102U
Page 1: ......
