→
Specify a static IP
or
look up the automatic DHCP assigned IP
in the
network settings sub-menu, depending on your network type
→
enter the password
in the wireless network settings sub-menu to
gain access to a password-protected wireless network
5
SAVE
settings
and exit the menu, then
REMOVE
the USB keyboard.
→
The player will reboot with new settings in place.
Settings are now retained in flash memory so that you won’t lose
them even if you remove the power.
6
(OPTIONAL)
Using a wired Ethernet connection
The optional
USB Ethernet Adapter
should be connected
prior to system boot up. If not, reboot as follows:
Press the Power Button on the rear of the device to shut down >
unplug power
>
plug in the USB Ethernet adapter
>
reconnect power
cord
→
The internal wireless radio is now disabled and Ethernet port is
active
→
If you need to re-adjust menu settings, disconnect the USB
Ethernet adapter anytime and plug in the USB keyboard (powering
down is not need). Remember to reattach USB Ethernet Adapter each
time
before
you boot/reboot the system.
Media support and storage expansion
You can use either USB or network methods to upload contents for playback
on the media player. The player accepts JPG (baseline, non-interlaced)
images and MP4/DIVX/XVID videos up to 720x480 resolution. Images and
videos, regardless of resolution, will be played to widescreen aspect ratios.
If you need more storage than the 2GB of internal memory
provided, you can insert a 4GB or larger CF/SD card into the
expansion ports
prior to boot up
.
IMPORTANT
: Do not place content on the card as it will be formatted.
