3
Wired connection (
OPTIONAL
): Attach the USB Ethernet Adapter accessory (sold separately; part no.
IAD-ACC-ITM-0019) to media player’s USB port and connect a LAN cable to the adapter’s other end (RJ-
45 port).
REBOOT
player to initialize the adapter.
Player IP address
You will also need an IP address for the player on your network. This could be set automatically (DHCP) or manually
(static IP):
1) DHCP – automatically assign network IP address
DHCP is enabled by default. You do not need to change the settings unless setting a static IP.
2) Static – manually assign network IP address
Clock and calendar settings
Time and Time Zone must be set correctly for scheduled playback.
Move the highlight to “Static IP” below, press
“Space bar” on the keyboard to fill in the star (*)
at the Static IP brackets, and press “Enter” on
the keyboard to select <OK>.
Proceed to configure an available static IP address.
Please ask your network administrator for
assistance if necessary
Highlight “IP configuration” and press “Enter” on
keyboard to <Select>
