6
IAdea 22” Touch-Enabled Digital Meeting Room Door Sign Hardware
Copyright© 2018 IAdea all rights reserved
Reset smart signboard to factory default
3
To change smart signboard system lan
-
guage, select “
(Current Language) ....
”
For system configurations, select “
Ad-
vanced.
”
Important recommended configurations:
1) Set correct time, date, and time zone for
properly scheduled playback.
2) Set password to prevent unauthorized
access during setup menu.
3) Set network for establishing network
connection.
1
Use a pen to press and hold the reset button - do not release until Step 4.
2
Insert the power cord.
3
Wait 30 seconds for the system reboot indicating your data is erased.
4
Release the reset button and your smart signboard will initialize in facto
-
ry default state.
4
Once the smart signboard has completed
all the recommended configurations, com
-
plete the last boot up process and your
smart signboard is ready for the pre-load
-
ed content management system.
