—
56
—
AP-
16
00T-
PMCL
VideoProcessBypassMode
The video process bypass mode is a function that bypasses internal video processing on the
camera. When bypass is enabled, the sensor output and camera output data can be set to
the same bit width.
12-bit outputs (RGB12V1Packed) can only be performed in bypass mode.
VideoprocessbypassMode
On
Off
Camera operation
The following functions will be
disabled, regardless of their
configurations.
Gain[DigitalRed],
Gain[DigitalBlue],
BlackLevel,
LUT,
Shading,
Binning(H,V),
Enhancement,
ColorMatrix
All video processes are enabled.
Camera output
Base(RGB8)/Medium(RGB8,
RGB10) /Full(RGB8)/EightyBit(RGB8)
Medium(RGB12)
■
Functions available in VideoProcessBypassMode
The following functions can be used in video process bypass mode.
Gain[AnalogAll], Gain[AnalogRed], Gain[AnalogGreen], Gain[AnalogBlue],
AutoGainControl, AutoShutterControl, AutoWhiteBalance,
SequencerMode,
BlemishCompensation
■
To enable VideoProcessBypassMode
Item
Setting value / selectable
range
Description
VideoProcessBypassMode
On
Enable
VideoProcessBypassMode.
In VideoProcessBypassMode, saturated level of brightness decreases.