10
5.
Transportation
5.1
IX-HNN50
H/60
H/70
H/80
H
Use a dolly, forklift, crane, etc., to transport the robot.
When transporting the robot, move the robot slowly by paying attention to the balance of the robot and being
careful not to apply vibration or shock.
5.1.1
Transporting the Ceiling Specification
Remove the arm locking plates and let arms 1 and 2 extend straight.
Loop the cables around the base and secure them with adhesive tape, etc., or secure the cables to the
transporting stays with adhesive tape, etc.
If a crane is used, install the supplied eye-bolts (4 pcs) on the transporting stays. Remove the arm locking plates,
let arms 1 and 2 extend straight, and transport the robot in the posture shown below.
Transporting posture of ceiling specification using eye-bolts
Rope
Transporting stay
Remove the arm locking stay
and let arms extend straight.
Summary of Contents for IX Series
