- 24 -
Switch Function: Enables you to set the System Management Interrupt (SMI) button function in DOS.
The choice: Disabled or Break /wake.
MODEM Use IRQ: This determines the IRQ which the MODEM can use. The choice: 3, 4, 5, 7, 9, 10, 11,
r Auto.
o
HDD Off After: The IDE hard drive will spin down if it is not accessed within a specified length of time.
ptions are from 1 Min to 15 Min and Disable.The choice: Disabled, 1 Min ~ 15 Min.
O
the system has "hung." The choice: Instant-Off or Delay 4 Sec.
: This item enables your computer to automatically restart or return to its
a power failure. The choice: Always Off, Always On, Keep
Pre-state.
PM Wake Up Events: Press <Enter> to enter the sub-menu of detailed options.
IRQ [3-7, 9-15], NMI
:
When enabled, any event occurring at IRQs 3 through 15 (excluding IRQ 8) will
awaken a system, which has been powered down. The choice: Enabled, Disabled.
IRQ 8 Break Suspend
: This field allows you to enable or disable monitoring of IRQ8 so that it does not
awaken the system from a suspend mode. The choice: Enabled, Disabled.
RING Power Up Control
: When set to Enabled, the system power will be turned on if there is any modem
activity. The choice: Enabled, Disabled.
PCIPME Power Up Control
:
When set to Enabled, system power will be turned on if there is any PCI card
activity from PCI cards that trigger a PME event, such as LAN or Modem cards. The choice: Enabled,
Disabled.
PS2KB Power Up Control
:
When Select Password, Please press ENTER key to change Password Max 8
numbers. If Select Password, and press Enter twice it mean KB Power On Function Disable. Hot Key:
Alt+Ctrl+<- The choice: Hot key, Password, Any key.
PS2MS Power Up Control
:
This item selects the PS2MS Power Up Control. The choice: Disabled, Click, Move
& Click.
Power Up by Alarm:
When set to Enabled, the following three fields become available and you can set the
nth Alarm: This item selects the alarm date. Key in a DEC
m
a power saving mode or can awaken the system from such as a mode. In effect, the system
h
abled, even when the system is
e
IDE
:
t
acti
ndary IDE
ving timeout counters
s de
#
When
ter will not power on the
: Dis
Power Button Override: Pressing the power button for more than 4 seconds forces the system to enter
he Soft-Off state when
t
Power State Resume Control
last operating status after power returns from
month, date (day of the month), hour, minute and second to turn on your system. The choice: Enabled,
Disabled.
Month Alarm
:
This is for specifying the alarm month which system will awaken the system from suspend
mode. The choice: NA, 1 ~ 12. Day of Mo
number: Min=0, Max=31.
Time (hh : mm : ss) Alar
This item selects the alarm Time. [hh] Key in a DEC number: Min=0, Max=23. [mm/ss] Key in a DEC
number: Min=0, Max=59.
* Reload Global Timer Events **
*
Global Timer (power management) Events are I/O events whose occurrence can prevent the system from
ntering
e
remains alert for anyt ing that occurs to a device that is configured as En
mod
in a power-down
.
Primary/Secondary
When these items are enabled, the system will restart the power-saving timeou
counters when any
vity is detected on any of the drives or devices on the primary or seco
channels.
The choice:
Disabled or Enabled.
FDD,COM,LPT Port
:
When this item is enabled, the system will restart the power-sa
when any activity i
tected on the floppy disk drive, the serial ports, or the parallel port. The choice:
Disabled or Enabled.
PCI PIRQ[A-D]
:
this item is disabled, any PCI device set as the Mas
system. The choice
abled or Enabled.
