Page 2 2019-05-10 iancanada.mail@gmail.com
Smart battery management.
End charge voltage can be programmed from the OLED GUI
Battery run time can also be programmed from the OLED GUI.
Equipped with protections, such as over current, over charge and over discharge protection as well as relay
protection.
Charging voltage, current and status can be monitored and displayed at real-time.
Multiple LifePO4 power supplies can be bridged together to get more voltage rails.
OLED control board can be beaked from main PCB in order to move to front panel.
Programmable screensaver function to protect OLED from screen burn-in.
Can use either 26650 battery cells with tabs or standard 26650 battery holders.
D. LifePO4 MkIII new improvements
Ready for upgrading to ultra capacitor power supply by integrating with UcMateConditioner and UcHybrid
through UcAdapter PCB (optional).
New continuous DC 5V mode.
Protection resistors were replaced by PTC fuses to reduce the risk of possible damaging.
Optimized PCB layout with double thickness copper layers to lower power supply ESR even more.
Accuracy of voltage measurements and monitoring were increased.
Can have up to six 3.3V LifePO4 voltage output rails in total.
All mounting holes are still compatible with MKII.
E. Layout and Dimensions (in mm)
