Page 8 2019-05-10 iancanada.mail@gmail.com
I.
Battery configurations
BT6:
A 26650 LifePO4 battery cell must be assembled for 3.3V voltage rail at J1.
BT7:
A 26650 LifePO4 battery cell must be assembled for 3.3V voltage rail at J2.
BT2, BT10, BT9, BT8:
26650 LifePO4 battery cells can be configured for voltage rail at J4.
Output voltage
Battery cells need to be assembled
Jumper wire
13.2V
BT2, BT10, BT9, BT8
None
9.9V
BT2, BT10, BT9
TP7-TP8: short
6.6V
BT2, BT10
TP9-TP10: short
3.3V
BT2
TP11-TP12: short
0V
Non
Non
BT5, BT4, BT3, BT1:
26650 LifePO4 battery cells can be configured for voltage rail at J3.
Output voltage
Battery cells need to be assembled
Jumper wire
13.2V
BT5, BT4, BT3, BT1
None
9.9V
BT5, BT4, BT3
TP1-TP2: short
6.6V
BT5, BT4
TP3-TP4: short
3.3V
BT5
TP5-TP6: short
0V
Non
Non
J. LED indicators
LED
Descriptions
Notes
D9
DCIN
Lit when DC input is connected
D8
Charge status
Lit when battery cells are in charging
Flash when charger is stopped in standby mode
D11
POWER status
Lit when power is on
Flash when power button is press hold
