Ambient Self-Cleaning Dust Collector
Please read and save these instructions. Read carefully before attempting to assemble, install, operate or maintain the
product described. The continual observance of these procedures will help increase your production and extend the life of the
equipment.
5
Filter
Aluminum Mesh
1.
Efficiency: Capturing welding sparks and steel chips
2.
Specification: 440 x 540 x 22mm [17.4” x 21.3” x 0.87”]
3.
Quantity: 2 pcs
Cartridge Filter
1.
Efficiency: Filtering very fine particles
2.
Specification: Ø380 x 660mm [Ø15” x 26”]
3.
Quantity: 4 pcs
4.
Filtering area: 15m
2
x 4 = 60m
2
(645.6 ft
2
)
Assembly
WARNING: Read and understand all of the precautions
stated in the Manual, and for your safety, do not connect
the Ambient Self-Cleaning Dust Collector before the
assembly is finished.
The machine must be fully assembled before it can be
operated.
Before beginning the assembly process, check if the machine
and components are consistent with those indicated in the
Parts List.
If any doubt arises or when the components are incomplete,
please contact your dealer.
NOTE: For correct assembly, refer to the Illustrations and
Parts List on pages 5-7.
Aluminum Mesh
1.
Pull out the aluminum mesh.
2.
Install with a new one.
