FREESCALE TOWER SYSTEM
Install the Software
Tools and Updates
a. Insert the DVD, install IAR Embedded
Workbench for ARM
®
(Kickstart edition
recommended) and software updates.
You’ll be directed to an online product
registration page to get your license
number and key.
b. Connect your PC and IAR J-Link
Lite using the supplied USB mini cable.
Choose “Install from a specific location”
and browse to \Program Files\IAR
Systems\Embedded Workbench 6.0
Kickstart\arm\drivers\JLink\ directory to
locate the USB driver.
c. Install the P&E Micro Kinetis Tower
Toolkit from the DVD to install the OSJTAG
and USB-to-Serial drivers under Software.
Set Up the
K60N512 Board
a. You may set up the K60N512 board
in standalone mode or in Tower System
mode together with other Tower Systems
modules, such as TWR-SER (follow
assembly instructions found in the
TWR-ELEV module).
b. Connect the IAR J-Link Lite debug
probe to the cortex debug connector on
the K60N512 board with the 19-pin ribbon
cable, then connect your PC and IAR J-Link
with the supplied USB mini cable.
c. Supply power by either applying a
jumper shunt on J12 to allow the J-Link to
supply power (for use with TWR-K60N512
in stand-alone mode only, or connecting
your PC to the Power/OSJTAG mini-B
USB connector using the supplied USB
cable (for use with TWR-K60N512 in
Tower System mode).
STEP
1
STEP
2
Install Software Tools and BSP
The installation DVD contains all the software and documentation you need to start building and
running embedded applications on the Freescale Kinetis K60N512 kit. We recommend that you
follow the installation instructions on the DVD and use the default directories for installation.
electronic components distributor
