Modello - Modèle - Model
Modell - Modelo
GLEE MID 23
Fabbricante - Constructeur
Manufacturer - Hersteller
Fabricante
EPTA S.p.A. - Sede legale
Via Mecenate, 86 - 20138 Milano – Italy
Capitale € 68.515.000 - R.E.A./MI – 1730229
Registro delle Imprese e Cod.Fiscale n. 04160730968
Partita IVA 04160730968
PAGE
18/68
N° DOC
UM000427
The symbol appearing on the rating plate of the appliance and on the documents attached
indicates that:
•
the product was issued after August 13, 2005;
•
the product is subject to “separate collection”, and must not be treated as household
waste and cannot be delivered at a landfill.
For further details on treatment, recovery and recycling of this product, contact the relevant
local office, the household waste collection service or the seller that has sold the product.
WE DECLARE THAT THE CABINET IS CONFORMING TO RoHS 2011/65/EC DIRECTIVE.
The cabinet contains oil, inflammable cooling gas, plastic and metallic components
and glass.
WARNING!
Polyurethane insulation uses CICLOPENTHANE as expander, that
doesn’t affect the environment but is inflammable.
To guarantee the same respect when it’s disposed of , never abandon the equipment
outside. Don’t throw the packaging material from your equipment in the rubbish but
sort the various materials: eg.polystyrene, cardboard, plastic bags. The demolition
of the cabinet and the recovery of the component materials must be carried out
according to the local regulations in force in this matter.
WARNING!
For out of use equipment:
• Disconnect the power supply plug.
• Remove the power supply cable and eliminate it together with the plug.
•
Do not remove the drawers and various components inside the tank, to make it more difficult
for children to enter the refrigerated chamber of the equipment.
•
Children are forbidden from playing with the decommissioned equipment. Danger of suffocation!
The equipment contains flammable gas inside the refrigeration circuit which must be
appropriately disposed.You need to avoid damaging the refrigerating circuit when dismantling
the equipment.
2.
GENERAL INFORMATION
Take out packaging and clean all the cabinet using warm water together with 5% of neutral
soap then dry it with a soft cloth; for the glass parts only use specific products, avoiding the
use of water which can leave on the glasses limestone residues.
•
It is necessary that the capacitor unit is in the free air exchange
condition, therefore the ventilation zones must not be obstructed
by boxes or otherwise.
•
Install and position the unit in such a way so as to allow easy
access to the power socket.
•
Never place containers of liquid on or immediately above the
ticket counter; should the content spill out, it would damage
the counter.
•
The measured sound pressure emanated A is below 70dB (A).
10
It is fundamental to comply with the distances indicated
(cm) for correct installation of the equipment.
