14
Motion Detect
This section will be available if the recording is set to “Triggered”, this particular
area allows users to customize sections of detection and the sensitivity.
Display Screen:
Hit the “Refresh View” button to refresh the image
Detection Settings:
Allows custom areas to detect on the displayed screen
a. Full-area detection:
Detects all areas on the screen
b. Custom detection:
Detects user created detection blocks
Add new area: Select the icon “Add new Area” to add new area
to detect, do this by holding down the right mouse button over the
displayed screen area to create a new block.
Delete Area: Select a block on the displayed screen and hit this
button to delete it
Delete All Areas: Deletes all blocks on the displayed screen
Test Detection: Test the detection by moving an object in front of
the camera, the blocks should change color when it detect motion
c. Sensitivity:
Adjust the sensitivity of the detection
Copy Right
©
IA Technologies 02/23/2011
Webpage :
www.iat101.com
;
www.ia-tecs.com
