TRU 650 ACCESS CONTROL SYSTEM USERS GUIDE
Copyrighted by Integrated Biometrics Inc., 2008
- 21 -
1.9.1 Access Times Section
The “List of Access Times” section is used to set up and modify Access times.
1.9.1.1 To set up a new Access Time click on the “Add” icon in this section. The window shown
below will appear. To modify an existing Access Time, click on the desired line to highlight, and
click on the “Modify” Icon.
1.9.1.2 This window gives the option of four breaks in access times, such as 0800 to 1200, then
1300 to 1700, etc. This would give access in all hours between 0800 and 1700, except for 1200 to
1300. Each day can be set up for different access times, or all days can be set the same. The times
can be set with the up and down arrows, or by clicking on the box and typing in the desired times.
1.9.1.3 If setting all days with the same times, example 0800 to 1700, simply fill in any day
Monday through Friday, select that day, example Monday, from the drop down menu at the bottom
left of this window, and click the “Apply” button. This will apply this time to all days.
1.9.1.4 Do not click the “Apply” button,
unless
, you want to apply the same times to all days. If
access times vary by day, do not click the “Apply” button. Simply click the “Save” button.
1.9.1.5 Helpful hint. When naming Access times, it can be helpful to add to the end of the name
the words “Access Times.” For instance, in the example shown below, instead of naming these
times “First Shift”, they were named “First Shift Access Times.” This helps in the screens where
you visually check Groups, and Access Times, and Users. \
1.9.1.6 Note that when inputting a set of Access Times, the times that are inputted for Hol1, Hol2,
and Hol3 will apply as the access times, to the Holidays shown under the “List of Holidays” in the
right side of this window that are input as Hol1 or Hol2 or Hol3.
