Manual
ibaDAQ
18
Issue 1.1
Important note
Contact the iba support when the error LED indicates a fault.
7.2.2
Operating state and user-defined displays
Multi-colored LEDs (Lic and Dat) indicate the status of the license and of data recording.
It is possible to assign signals to 2 multi-colored LEDs in ibaPDA to display user-defined
states.
LED
Color Status
Description
Lic
Yellow
Demo licenses on dongle released
Green
Dongle OK
Red
No dongle or no license
Dat
Off
No data recording configured
Yellow
Waiting for start trigger
Green
Recording data
Red
Data recording interrupted/stopped
PDA1
Yellow
Green
User-defined display
Red
Off
PDA2
Yellow
Green
User-defined display
Red
Off
7.2.3
Status of the digital inputs
The green LEDs indicate whether a digital input is active or not.
LED
Status
Description
DI 00, DI 01
Off
No signal, logical 0
On
Signal active, logical 1
7.2.4
Status of the digital outputs
LED per
channel*
Status
Description
DO 00, DO 01 Off
No signal, logical 0
On
Signal active, logical 1
*If an output is deactivated by ibaPDA, the corresponding channel LED will remain dark
.