iBaby Monitor User Manual
21
server first. And please apply some storage, and the authority to write and create
sub-category into it.
5.2.4 Alarm Server
Figure 23
Please confirm if you have connected to alarm server. The alarm message format as
follow:
GET /api/alarm.asp
？
username=username&
userpwd=password&
rea=alarm type (1=Motion Detection, 2 =Alarm from Alarm in port)&
io=0
Alarm server needs developing by user. User can extend other functions on this server,
like SMS, MMS alarm, and mobile phone etc.
5.3 Advanced
5.3.1 User Setting
There are three levels of authority; they are Administrator/Operator/Visitor. Administrator
have the highest authority, it can do any change to the settings. Operator account only
can operate the IP camera, can’t do changes to the settings. Visitor account only can
watch the video, can’t do any operation to the IP camera.
By default, the
administrator’s user name is admin, password: 123456
.
Figure 24
iBaby Monitor User Manual
22
5.3.2 Multi Device Setting
Figure 25
As Figure 25, User can maximum add 9 devices to view the device simultaneously. Click
refresh button to check the device in the LAN. When click the device, will popup setting
dialogue box and input the device info, as figure 26 and click save. After that, must click
submit button to save.
Figure 26
5.3.3 Other settings
You can cho
ose open or close indicator LED. If set PTZ center on start ‘Yes’, when start
device, Pan/Tilt will move to center and then stop. You can also set the Horizon patrol
rounds and vertical patrol rounds, when you click patrol on the ‘view’ interface, it will
round according to your setting rounds. You can also set PTZ rate, 0 means fastest.
