iBaby Monitor User Manual
18
If this prompt shows, it may be that the monitor is not connected to your Wi-Fi network.
Please follow the steps as below:
1)Please use the phone’s original USB cable to enable a great connection.
2)Place the monitor near the router as close as possible while
installing
. If your router
supports 5GHz, we recommend that your
connect your
phone
to the
5GHz Wi-Fi before
installation.
3)The best Wi-Fi name & password should be 8-32 characters comprised of upper and
lower-case letters, numbers, and underscores. And they should not contain symbols or
special characters such as Chinese, Japanese, Korean, etc.
4)Enable your router’s SSID
to be
broadcast, not hidden
.
5)Select WPA2-PSK as the Wi-Fi authentication type and select AES as the encryption
type on the router.
Q2.Android Device:
There is a prompted message indicates installation failed.
Why? (the LED status
light on the back of the monitor is a blinking red light)
Figure 16
It indicates that your monitor has not connected to your Wi-Fi network. Please follow the
steps as below:
1)Verify that the Wi-Fi password you enter is correct. Unplug the power adapter, and then
plug back it to reinstall.
2) Place the monitor as close to the router as possible during installation. If your router
supports 5GHz, we recommend connecting to the 5GHz Wi-Fi.
Deleted:
installation
Deleted:
connects
Deleted:
broadcasting
Summary of Contents for M7
Page 1: ...iBaby Labs Inc ...
