PLENTZIA BIDEA, 3 BILLELA AUZOTEGIA
48100 MUNGIA- SPAIN
CRB AUTOMAT
Comissioning
Plug the connector to provide power (230 V) to the controller.
If this is the first time the control unit is used, you will be asked to calibrate the touch screen through 3 points.
Once calibrated, the following symbol appears in the screen
Once calibrated, the following symbol appears in the screen
Press the power icon (stand-by) for 2 seconds to start the unit.
The unit systematically goes through two initial screens.
The first time the unit is turned on, the LANGUAGE, DATE and HOUR SELECTION screen is accessed. By
default the starting language is English.
To select the language, click on the grid to the right of LANGUAGE SELECTION and select the desired
language from SPANISH (ESP), ENGLISH (ENG), SWEDISH (SE) and FRENCH (FRA).
