connected directly to the Ethernet.)
Computer with a working Ethernet Adapter and an Ethernet cable with RJ45 connector
TCP/IP protocol on each pc
Web browser, such as Microsoft Internet Explorer, Mozilla Firefox
2.2 TCP/IP Configuration
The default IP address of the iB-OR5A5300N 5 GHz 300Mbps Outdoor AP Router is
192.168.1.200
and the default Subnet Mask is
255.255.255.0
. These values can be changed as per the requirement.
In this guide, we use all the default values for description.
Connect the local PC to the LAN ports of the Router. The IP address for your PC can be configured in
the following two ways.
Configure the IP address manually
1) Set up the TCP/IP protocol for your PC.
2) Configure the network parameters. The IP address is 192.168.1.xxx (“xxx” is any number
from 1 to 254), Subnet Mask is 255.255.255.0 and Gateway is 192.168.1.200 (The
Router’s default IP address).
Obtain an IP address automatically
1) Set up the TCP/IP Protocol in
“Obtain an IP address automatically”
mode on your PC.
2) Then the built-in DHCP server will assign IP address for the PC.
Now, you can run the Ping command in the
command prompt
to verify the network connection
between your PC and Router.
2.3 Connect to 5 GHz 300Mbps Outdoor AP Router
Open a WEB browser, i.e. Microsoft Internet Explorer 6.1 SP1 or above, then enter IP address as
192.168.1.200
on the URL to connect the iBall Baton iB-OR5A5300N Broadband Router.
Username:
admin
|
Password:
admin