iB-W4GX150N
4G Wireless-N Router
-40-
Click the
Connect
button to connect immediately. Click the
Disconnect
button to
disconnect immediately.
Connect on Demand -
You can configure the Router to disconnect from your Internet
connection after a specified period of inactivity (
Max Idle Time
). If your Internet connection
has been terminated due to inactivity,
Connect on Demand
enables the Router to
automatically re-establish your connection as soon as you attempt to access the Internet
again. If you wish to activate
Connect on Demand
, click the radio button. If you want your
Internet connection to remain active at all times, enter 0 in the
Max Idle Time
field.
Otherwise, enter the number of minutes you want to have elapsed before your Internet
connection terminates.
Connect Automatically -
Connect automatically after the Router is disconnected. To use
this option, click the radio button.
Connect Manually -
You can configure the Router to make it connect or disconnect
manually. After a specified period of inactivity (
Max Idle Time
), the Router will disconnect
from your Internet connection, and you will not be able to re-establish your connection
automatically as soon as you attempt to access the Internet again. To use this option, click
the radio button. If you want your Internet connection to remain active at all times, enter "0"
in the
Max Idle Time
field. Otherwise, enter the number in minutes that you wish to have
the Internet connecting last unless a new link is requested.
Caution
: Sometimes the connection cannot be disconnected although you specify a time to
Max Idle Time, since some applications are visiting the Internet continually in the
background.
Note:
If you don't know how to choose the appropriate connection type, click the
Detect
button to
allow the Router to automatically search your Internet connection for servers and protocols. The
connection type will be reported when an active Internet service is successfully detected by the
Router. This report is for your reference only. To make sure the connection type your ISP
provides, please refer to the ISP. The various types of Internet connections that the Router can
detect are as follows:
PPPoE
-
Connections which use PPPoE that requires a user name and password.
Dynamic IP
-
Connections which use dynamic IP address assignment.
Static IP
-
Connections which use static IP address assignment.
The Router can not detect PPTP/L2TP/BigPond connections with your ISP. If your ISP uses
one of these protocols, then you must configure your connection manually.
