iB-WRX150NE
150M Extreme Wireless-N Router
- 40 -
Figure 4-35 (Wireless MAC Filtering)
To filter wireless users by MAC Address, click
Enable
. The default setting is
Disable
.
MAC Address
-
The wireless station's MAC address that you want to filter.
Status
-
The status of this entry either
Enabled
or
Disabled
.
Description -
A simple description of the wireless station.
To Add a Wireless MAC Address filtering entry, click the
Add New…
button. The "
Add or Modify
Wireless MAC Address Filtering entry
"
page will appear, shown in Figure 4-36:
Figure 4-36 (Add or Modify Wireless MAC Address Filtering entry)
To add or modify a MAC Address filtering entry, follow these instructions:
1. Enter the appropriate MAC Address into the
MAC Address
field. The format of the MAC
Address is XX-XX-XX-XX-XX-XX (X is any hexadecimal digit). For example:
00-0A-EB-B0-00-0B.
2. Give a simple description for the wireless station in the
Description
field. For example:
Wireless station A.
3. Select
Enabled
or
Disabled
for this entry on the
Status
pull-down list.
4. Click
the
Save
button to save this entry.
To modify or delete an existing entry:
