iB-WRX150NE
150M Extreme Wireless-N Router
- 41 -
1. Click
the
Modify
in the entry you want to modify. If you want to delete the entry, click the
Delete
.
2. Modify the information.
3. Click
the
Save
button.
Click the
Enable All
button to make all entries enabled
Click the
Disable All
button to make all entries disabled.
Click the
Delete All
button to delete all entries.
Click the
Next
button to go to the next page.
Click the
Previous
button to return to the previous page.
For example:
If you desire that the wireless station A with MAC address 00-0A-EB-B0-00-0B and
the wireless station B with MAC address 00-0A-EB-00-07-5F are able to access the Router, but all
the other wireless stations cannot access the Router, you can configure the
Wireless MAC
Address Filtering
list by following these steps:
1. Click
the
Enable
button to enable this function.
2. Select the radio button “Deny the stations not specified by any enabled entries in the list to
access” for
Filtering Rules
.
3. Delete all or disable all entries if there are any entries already.
4. Click
the
Add New...
button.
1) Enter the MAC address 00-0A-EB-B0-00-0B/00-0A-EB-00-07-5F in the
MAC Address
field.
2) Enter wireless station A/B in the
Description
field.
3) Select
Enabled
in the
Status
pull-down list.
4) Click
the
Save
button.
5) Click
the
Back
button.
The filtering rules that are configured should be similar to the following list:
