iB-WRX150NE
150M Extreme Wireless-N Router
- 48 -
number or service port range in the
Service Port
box.
3. Type the IP Address of the computer in the
IP Address
box.
4. Select the protocol used for this application, either
TCP
,
UDP
, or
All
.
5. Select
the
Enabled
to enable the virtual server.
6. Click
the
Save
button.
Figure 4-46 Add or Modify a Virtual Server Entry
Note:
If your computer or server has more than one type of available service, please select another
service, and enter the same IP Address for that computer or server.
To modify or delete an existing entry:
1. Click
the
Modify
option in the entry as you need to modify. If you want to delete the entry,
click the
Delete
.
2. Modify the information.
3. Click
the
Save
button.
Click the
Enable/Disable All
button to make all entries enabled/disabled.
Click the
Delete All
button to delete all entries.
Click the
Next
button to go to the next page and click the
Previous
button to return the previous
page.
Note:
If you set the service port of the virtual server as 80, you must set the Web management port on
“
Security
→
Remote Management
” page to be any other value except 80 such as 8080.
Otherwise there will be a conflict to disable the virtual server.
4.9.2 Port Triggering
Choose menu “
Forwarding
→
Port Triggering
”, you can view and add port triggering in the
screen as shown in Figure 4-47. Some applications require multiple connections, like Internet
games, video conferencing, Internet calling and so on. These applications cannot work with a
