10
08: Autonomy limitation setting
Interface
Setting
Parameter 3:
Set up backup time on battery mode for
general outlets.
0-999:
setting the backup time in minutes from 0-999 for
general outlets on battery mode.
0:
When setting as “0”, the backup time will be only 10
seconds.
999:
When setting as “999”, the backup time setting will be
disabled. (Default)
00: Exit setting
Battery Group Number Setting
For proper backup time details, please set Battery group number details as per below method
1. Open iBall View Power software, if you have not installed, then download and Install from provided link
below
www.iBall.co.in/File/Product/Drivers/iBall%20ViewPower%20For%20Windows.rar
2. Before setting the Battery group of UPS, make sure that Batteries should be connected and the UPS is ON
3. Use USB cable to connect the UPS with Computer
4. It will get detect and configured automatically, no need to install any driver.
5. Double click and open
application.
The main window Figure will be shown as under