iBall Slide i9018, User Manual

9

Pair & connect with Bluetooth devices 
Before your slide can communicate with a Bluetooth headset or hands-free car kit, the devices must “pair”, then “connect”: 
1. Make sure you have turned Bluetooth on.
2. Select Settings > Bluetooth > Bluetooth settings. 
3. Your slide starts scanning for Bluetooth devices within range. As they are found, the devices appear in the list of Bluetooth devices. 
4. To pair with a device in the list, select it. 
5. Type the device’s PIN and then selects ‘OK’. 
6. Once paired, select the device name to connect. You can also touch & hold The name to open the context menu, and then select Connect. 
7. Pairing and connection status appear under the device name. 
8. To disconnect or unpaired with a device, touch & hold the device to open the context menu. Select Disconnect or Unpair, as appropriate. 
If you select
‘Unpair’ when connected, you will be disconnected as well. 
Notes: The slide supports only the headset and hands-free Bluetooth profiles, so if you try to connect to a device that is not a headset or 
hands-free car kit, then you will receive an “unable to connect” message. 
If you pair with a second headset while connected to the first, the first headset will remain connected. To switch connection to the second 
headset you must manually select that headset again after pairing.

Rescan for Bluetooth devices 

If you want to update the list of Bluetooth devices, select ‘Scan for devices’.

3. Data Usage

With this option you can set your Slide data downloading limitation, in the Setting      (right up corner) you will get the source option of Auto 
Sync data & Mobile hotspots. With the help of graph, you can get the updated information of downloaded data.

Auto Sync :

 Any Changes you make to your accounts on the web will be automatically copied to your tablet. Sime accounts may also 

automatically  copy  any  changes  you  make  on  the  tablet  to  the  web.  A  Google  account  works  this  way.  To  choose  which  kinds  of 
information to sync within each account, go to Settings / Accounts.

Mobile Hotspot : 

Select the Wi-Fi networks which are mobile hotspots. Apps can be restricted from using these networks when in the 

background. Apps may also warn before using these networks for large downloads.

4. More

• 

Airplane mode:

 When airplane mode is selected, all wireless connectivity is off. This icon   will display in the status bar when airplane 

   mode is selected.
• 

Ethernet :

 You can connect your Ethernet network/ LAN cable to this Slide with Convertor.

• 

VPN :

  VPN stands for Virtual Private Mode. Using this feature, you can connect to your private network  through a public network in a 

   secured way. You can add a VPN connection, customize it as per your requirement and then save the settings. Once the network is 
   created, select the network again to connect to it.
• 

Portable hotspot:

  Using hotspot, you can share your mobile network with other Wi-Fi enabled devices.

• 

Portable hotspot:

 Using hotspot, you can share your mobile network with other Wi-Fi enabled devices.

• 

Mobile Network :

   Data Enabled: Enable data access over Mobile network.
   Data Roaming: Use the device to connect to another network when you are roaming or Your home network is not available.
   Access Point Names:  Set up access point names (APN) as per your Data card vendor.
   Use only 2G : Use of 2G network will save battery usage.
   Network operator : Search for available networks and select a network for roaming. 
   Tethering and portable hotspot Use the device to connect to another network when you are roaming or your home network is
   not available.
• 

3G Support information 

: This is will help you of supported data cards list in this menu.