background image

FWA6504 

User’s Manual 

 

Foreword 

Copyright©  2014 IBASE Technology INC. All Rights Reserved. 

No part of this manual, including the products and software described in it, may be reproduced, transmitted, 
transcribed, stored in a retrieval system, or translated into any language in any form or by any means, except 
documentation kept by the purchaser for backup purposes, without the express written permission of IBASE 
Technology INC. (

“IBASE”). 

 Products and corporate names mentioned in this manual may or may not be registered trademarks or copyrights of 
their respective companies, and are used for identification purposes only. All trademarks are the property of their 
respective owners. 

Every effort has been made to ensure that the contents of this manual are correct and up to date. However, the 
manufacturer makes no guarantee regarding the accuracy of its contents, and reserves the right to make changes 
without prior notice. 

 
 

Safety Information

 

FWA6504 is designed and tested to meet the latest standards of safety for information technology equipment. 
However, to ensure your safety, it is important that you read the following safety instructions. 

 
 

Setting up your system 

• 

Read and follow all instructions in the documentation before you operate your system. 

• 

Do not use this product near water. 

• 

Set up the system on a stable surface or secure on wall with the provided rail. Do not secure the system on any 
unstable plane or without the rail. 

• 

Do not place this product on an unstable cart, stand, or table. The product may fall, causing serious damage to 
the product. 

• 

Slots  and  openings  on  the  chassis  are  for  ventilation.  Do  not  block  or  cover  these  openings.  Make  sure  you 
leave  plenty  of  space  around  the  system  for  ventilation.  Never  insert  objects  of  any  kind  into  the  ventilation 
openings. 

• 

This system should be operated from the type of power indicated on the marking label. If you are not sure of the 
type of power available, consult your dealer or local power company. 

• 

Use this product in environments with ambient temperatures betw

een 0˚C and 45˚C. 

• 

If you use an extension cord, make sure that the total ampere rating of the devices plugged into the extension 
cord does not exceed its ampere rating. 

 
 

Care during use 

• 

Do not walk on the power cable or allow anything to rest on it. 

• 

Do not spill water or any other liquids on your system. 

• 

When the system is turned off, a small amount of electrical current still flows. 

•      Always unplug all power, and network cables from the power outlets before cleaning the system. 

• 

If  you  encounter  the  following  technical  problems  with  the  product,  unplug  the  power  cord  and  contact  a 
qualified service technician or your retailer. 

 

The power cable or plug is damaged. 

 

 

Liquid has been spilled into the system. 

 

 

The system does not function properly even if you follow the operating instructions. 

 

The system was dropped or the cabinet is damaged. 

 
 

Lithium-Ion Battery Warning 

CAUTION

:  Danger  of  explosion  if  battery 

is

  incorrectly  replaced.  Replace  only  with  the  same  or  equivalent  type 

recommended by the manufacturer. Dispose of used batteries according to the manufacturer

’s instructions.

 

 
 
 
 

Summary of Contents for FWA6504

















Reviews: