19
VT-d
Virtualization solutions allow multiple operating systems and applications to run in independent partitions all on a
single computer. Using virtualization capabilities, one physical computer system can function as multiple "virtual"
systems.
BIOS SETUP UTILITY
Main
Advanced
PCIPnP
Boot
Security
Chipset
Exit
MPS Configuration
Select MPS
Revision
<- Select Screen
↑↓
Select Item
+- Change Field
Tab
Select Field
F1 General Help
F10 Save and Exit
ESC Exit
MPS Revision VT-d
[1.4]
MPS Version Control for OS
This option is specifies the MPS (Multiprocessor Specification) version for your operating system. MPS version 1.4
added extended configuration tables to improve support for multiple PCI bus configurations and improve future
expandability.
The default setting is
1.4
.
BIOS SETUP UTILITY
Main
Advanced
PCIPnP
Boot
Security
Chipset
Exit
PCI Express Configuration
Enable/Disable
PCI Express L0s and
L1 link power states
<- Select Screen
↑↓
Select Item
+- Change Field
Tab
Select Field
F1 General Help
F10 Save and Exit
ESC Exit
Active State Power Management
[Disabled]
BIOS SETUP UTILITY
Main
Advanced
PCIPnP
Boot
Security
Chipset
Exit
Configure Remote Access type and parameters
Select Remote Access
type.
<- Select Screen
↑↓
Select Item
+- Change Field
Tab
Select Field
F1 General Help
F10 Save and Exit
ESC Exit
Remote Access
Enabled
Serial port number
[COM1]
Base Address, IRQ
[3F8h, 4]
Serial Port Mode
[1115200 8,n,1]
Flow Control
[None]
Redirection After BIOS POST
Always
Terminal Type
ANSI
VT-UTF8 Combo Key Support
Enabled
Sredir Memory Display Delay
No Delay
When enabled, the Remote Access type and parameters are shown:
Serial port number -
Select Serial Port for console redirection.
Serial port mode -
Select Serial Port settings.
Flow Control -
Select Flow Control for console redirection.
Redirection After BIOS POST
Disable
: Turns off the redirection after POST.
Boot Loader
: Redirection is active during POST and during Boot Loader.
Always
: Redirection is always active. (Some OSs may not work if set to Always.)
Terminal Type -
Select the target terminal type.
VT-UTF8 Combo Key Support
–
Enable VT-UTF8 Combination Key Support for ANSI/VT100 terminals.
