BSP Source Guide
IBR117
User’s Manual
29
4
4.1 Preparation
The suggested Host platform is Ubuntu 12.04 and 14.04 in 32-bit and 64-bit
versions.
1.
Install necessary packages before building:
sudo apt-get install gawk wget Git-core diffstat unzip texinfo
sudo apt-get install gcc-multilib build-essential chrpath socat
sudo add-apt-repository ppa:git-core/ppa
sudo apt-get update
sudo apt-get install git
sudo apt-get install texinfo
2.
Decompress the IBR117 source file
ibr117.tar.xz
into "/home/" folder.
4.2 Installing Toolchain
Decompress Toolchain
poky.tar
into directory "/opt".
4.3 Building U-Boot
cd /home/ibr117
cd ibr117-x11/tmp/work/imx6dlsabresd-poky-linux-gnueabi/u-boot-imx/2016.03-r0/git
source /opt/poky/1.8/environment-setup-cortexa9hf-vfp-neon-poky-linux-gnueabi
make mx6dlsabresd_defconfig
make
4.4 Building Kernel
cd /home/ibr117
cd ibr117-x11/tmp/work/imx6dlsabresd-poky-linux-gnueabi/linux-imx/4.1.15-r0/git
source /opt/poky/1.8/environment-setup-cortexa9hf-vfp-neon-poky-linux-gnueabi
make imx_v7_defconfig
make zImage LOADADDR=0x10008000
make imx6dl-sabresd.dtb
Summary of Contents for IBR117
