BIOS SETUP
MB820 User’s Manual
35
Advanced BIOS Features
This section allows you to configure and improve your system and
allows you to set up some system features according to your preference.
Phoenix - AwardBIOS CMOS Setup Utility
Advanced BIOS Features
Hard Disk Boot Priority
Press Enter
ITEM HELP
CPU L1 and L2 Cache
Enabled
Menu Level
Hyper-threading Technology
Enabled
Quick Power On Self Test
Enabled
First Boot Device
Floppy
Second Boot Device
Hard Disk
Third Boot Device
CD-ROM
Boot Other Device
Enabled
Swap Floppy Drive
Disabled
Boot Up Floppy Seek
Disabled
Boot Up Numlock Status
On
Gate A20 Option
Fast
Typematic Rate Setting
Disabled
Typematic Rate (chars/Sec)
6
Typematic Delay (Msec)
250
Security Option
Setup
Select Hard Disk Boot Device
Priority
APIC Mode
Enabled
MPS Version Control for OS
1.4
OS Select For DRAM>64MB
Non-OS2
Report No FDD For WIN 95
Yes
Small Logo (EPA) Show
Enabled
Hard Disk Boot Priority
This item allows you to set the priority for hard disk boot. When you press enter,
the selections shows the current hard disks used in your system as well as the
“
Bootable Add-in Card
”
that is relevant to other boot sources media such as
SCSI cards and LAN cards.
CPU L1 and L2 Cache
Cache memory is additional memory that is much faster than conventional
DRAM (system memory). CPUs from 486-type on up contain internal cache
memory, and most, but not all, modern PCs have additional (external) cache
memory. When the CPU requests data, the system transfers the requested data
from the main DRAM into cache memory, for even faster access by the CPU.
These items allow you to enable (speed up memory access) or disable the cache
function. By default, these items are Enabled.
Hyper-Threading Technology
This feature is enabled when your processor supports Hyper-Threading
Technology. Otherwise, this field will be hidden.
Quick Power On Self Test
When enabled, this field speeds up the Power On Self Test (POST) after
the system is turned on. If it is set to
Enabled
, BIOS will skip some
items.
