Copyright © 2013 IBASE Technology Inc. All Rights Reserved.
5
IBASE Technology Inc.
**Based on the design of SE-602-N, the use of DVI port has certain limitations. In
order to have an image on the screen, the
“
odd number
”
port should be plugged
in first. If the
“
even number
”
port is plugged in first, then there will be no image
on the screen. This procedure also applies when using the two ports at the same
time in order to have image on the screens. The only requirement is to always
plugged in first the
“
odd number
”
port.
**In order to erase the EDID data, the system needs to be powered off and the DVI
connector has to be removed. Afterwards, press and hold
the EDID button while
power is introduced for five (5) seconds; then, release the EDID button.
Summary of Contents for SE-602-N
