Hardware Configuration
SI-324 User Manual
9
2
2.1 Installation / Replacement
You need to remove the device bottom chassis firstly before installations.
Remove 4 screws as indicated below and pull out the device bottom chassis
to install or replace the 1
st
memory module, mini-PCIe card, M.2 M2280 &
E2230 cards, and SIM card.
If you need to install or replace the 2
nd
memory module, move the jumper
caps, or replace the lithium battery, you also need to perform the following
steps.
1. Remove the following 3 screws to remove the M.2 heatsink.
