background image

 

65

 

 

C. Watchdog Timer Configuration 

 

The WDT is used to generate a variety of output signals after a user programmable count. The 

WDT is suitable for use in the prevention of system lock-up, such as when software becomes 

trapped in a deadlock. Under these sorts of circumstances, the timer will count to zero and the 

selected outputs will be driven. Under normal circumstance, the user will restart the WDT at 

regular intervals before the timer counts to zero. 

 

SAMPLE CODE: 

File of the NCT5523D.H 

//--------------------------------------------------------------------------- 

//                                                                                                                                                     

// THIS CODE AND INFORMATION IS PROVIDED "AS IS" WITHOUT WARRANTY OF ANY         

// KIND, EITHER EXPRESSED OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE             

// IMPLIED WARRANTIES OF MERCHANTABILITY AND/OR FITNESS FOR A PARTICULAR         

// PURPOSE.                                                                                                                                   

//                                                                                                                                                     

//--------------------------------------------------------------------------- 

#ifndef __NCT5523D_H 

#define __NCT5523D_H 

//--------------------------------------------------------------------------- 

#define      NCT5523D_INDEX_PORT 

(NCT5523D_BASE) 

#define      NCT5523D_DATA_PORT 

(NCT5521) 

//--------------------------------------------------------------------------- 

#define      NCT5523D_REG_LD 

0x07 

//--------------------------------------------------------------------------- 

#define    NCT5523D_UNLOCK 

0x87 

#define    NCT5523D_LOCK 

0xAA 

//--------------------------------------------------------------------------- 

unsigned int Init_NCT5523D(void); 

void Set_NCT5523D_LD( unsigned char); 

void Set_NCT5523D_Reg( unsigned char, unsigned char); 

unsigned char Get_NCT5523D_Reg( unsigned char); 

//--------------------------------------------------------------------------- 

#endif    //__NCT5523D_H 

 

 

Summary of Contents for SI - 83













































































Reviews: