BIOS Setup
SI-614 / SI-614-M User Manual
35
4
4.4.2
iSmart Controller
BIOS Setting
Description
Power-On after Power
failure
Enables / Disables the system to be turned on
automatically after a power failure.
PWR Resume Delay
Enables / Disables power on resume delay.
Temperature Guardian
Generates the reset signal when system hands
up on POST.
Schedule Slot 1 / 2
Sets up the hour / minute for system powe-on.
Important:
If you would like to set up a
schedule between adjacent days, configure two
schedule slots.
For example, if setting up a schedule from
Wednesday 5 p.m. to Thursday 2 a.m.,
configure two schedule slots. But if setting up a
schedule from 3 p.m to 5 p.m. on Wednesday,
configure only a schedule slot.
dra
ft
