iv
UPC-7210 Series User Manual
Green IBASE
This product complies with the current RoHS restrictions that prohibit
the use of the following substances in concentrations exceeding 0.1%
by weight (1000 ppm) except for cadmium, limited to 0.01% by weight
(100 ppm).
•
Lead (Pb)
•
Mercury (Hg)
•
Cadmium (Cd)
•
Hexavalent chromium (Cr6+)
•
Polybrominated biphenyls (PBB)
•
Polybrominated diphenyl ether (PBDE)
Important Safety Information
Carefully read the precautions before using the device.
Environmental conditions:
•
Put the device horizontally on a stable and solid surface during installation in
case the device may fall, causing serious damage.
•
Leave plenty of space around the device for ventilation.
•
Use this product in environments with ambient temperatures between 0
˚C and
50
˚C.
•
DO NOT LEAVE THIS DEVICE IN AN ENVIRONMENT WHERE THE
STORAGE TEMPERATURE MAY BE BELOW -20° C OR ABOVE 70° C. To
prevent from damages, the device must be used in a controlled environment.
•
Keep the device away from humidity to avoid fog or condensation from
accumulating on the inner surface of the panel.
Care for your IBASE products:
•
Before cleaning the device, turn it off and unplug all cables in case a small
amount of electrical current may still flow.
•
Use neutral cleaning agents or diluted alcohol to clean the device chassis with a
cloth. Then wipe the chassis with a dry cloth.
•
Use a computer vacuum cleaner to remove dust to prevent the air vent or slots
from getting clogged.
