Page 24
Important: When assembling or disassembling the timer gear
assembly, the 172 Control must be in the SERVICE position.
1.
Position Part No. 172D45 as shown. Part
numbers are moulded into each part
2.
Place Part No. 172D46 on Part No.
172D45 so that white (underside) arrow
points to 44 minutes on the BRINE/RINSE
timing to desired time (22-62 minutes)
after reassembly, appear on page 5 of
bulletin 172 O.M
3.
With Parts No. 172D45 and 172D46
together, insert Nos. 22A354-001 and
172D44 as shown.
5.
Assemble the 172B36 gear to the
172B39 support so that the deepest of
the four slots in the sleeve of the gear is
oriented as shown. Position the
gear/support assembly over the timing
gear/mounting bracket assembly; insert
the three phillips head screws and
tighten
4.
Place the tree-part timing gear
assembly on the timer mounting
bracket, Part No. 172D34, as
shown so the edge of the white
piece is aligned left of the screw
boss in the timer mounting bracket.
TIMING GEAR ASSEMBLY
Summary of Contents for AS30400
