Instruction Manual for Bread Slicer BTS15
www.allaboutbakery.com.au 13
Screw out, then you can loosen the tension of the blade in order to change the blade (see
figure 4.2b)
Figure 4.2b Replacing Slicing Blades
Adjusting the Belt of the Drive Pulley
Should the tension of the belt of the drive pulley (No. 1) becomes loose or tight
occasionally and causes slicing to be inefficient, you will need to adjust the belt.
To adjust the belt, first take off the guard board to expose the transmission
mechanism, then loose bolt (No.2) to move motor to get proper tension.
The tension should be rechecked after first working day to make sure it is at
proper position.