Instruction Manual for Spiral Mixer KL100
3.4 Automatic Operation
Set Automatic/Manual switch (f) to the automatic position the timers will now control the
mixing time as set by the operator and change the machine speed from low to high if
required. The speed and mixing time are now controlled by the timers.
1.
Place ingredients in the bowl and lower the safety guard.
2.
Set the low (b) and high (c) speed timers to required time.
3.
If only a low speed mix is required set the high speed timer to zero, the machine will
stop when the time set on the low timer is reached.
4.
Set the desired bowl direction (g).
5.
Push the low speed button (a) on the left side of the control panel, the machine will
now operate in low speed until the time is reached at which time machine will change
to high speed automatically.
6.
When machine changes to high speed the bowl direction should be in an anti-
clockwise direction.
7.
The machine will stop when the time set is reached.
Note
:
Bowl direction can be changed during mixing process in low speed by switching bowl
direction (g) from set side to required side stoping briefly in neutral. However when
the machine is in high speed the bowl must always be rotating in an anti-clockwise
direction.
