14
Display Example #3
The Time and Date screen is where the time and date for the real time clock will be entered. The user
can select the date format, a 12 hour or 24 hour time format and AM or PM by touching the
appropriate light blue squares. The center of the square will blacken to acknowledge your selection.
The blue lined box under the MM/DD/YY is for entering the date. Touch this box to enter the date.
The box will clear and is ready for the date to be entered. To enter August 15, 2012, in the US format
enter the date in a string of numbers using the
mmddyy
format: 081512. Use leading zeros for months
and days that are less than ten. If the International format has been selected, enter the number string
using the
ddmmyy
format: 150812. If the date format is changed at a later time, the date display will
automatically update and there is no need to reenter the date information. While entering the date or
time if a miss touch is made, press the
Del
button to delete the previous touch entry.
NOTE!
To correct or change a completed entry, just retouch the appropriate box. This clears the box
and the correct data can be entered. All entries on any screen can be corrected in this manner.
The two light blue squares below the date are for selecting the 12/ 24 hour format. After selecting the
appropriate time format, touch the blue lined time box to enter the time in the same manner used for
entering the date. To enter the time 8:35 p.m., touch 0835. When completed, touch the appropriate box
for AM or PM. If the 24 hour format has been selected enter the string 2035. The AM and PM boxes
will be grayed out and inoperative. When completed, touch the OK button. All data is now saved to
memory and the display has returned to the Utilities screen. The date and time will reflect your
changes.
The SUMMIT’s real time clock battery will maintain proper time for up to five years.
All operational memory such as the user programs and utilities settings are stored in a non-volatile
memory and will not be affected should the battery fail. The loss of date and time information when the
furnace has been turned off or suffered a loss of power indicates a low battery failure. Replacement is
necessary.
Date and Time
Set Date/Time
8:35
24 Hour
12 Hour
PM
AM
MM/DD/YY
1
2
3
4
5
6
7
8
9
0
Del
Ok
DD/MM/YY
Summary of Contents for SUMMIT
Page 10: ...10 Photo 3 ...