© Copyright Lotronic 2011
The light may be visible outside the speaker. This simply means that
SonicGuard is protecting your drivers. Should the lights illuminate for more than
a brief period, y ou should decrease the volume.
Should I Fuse My Speakers?
SonicGuard prov ides speaker protection that is far superior to fuses.
It does not recommend fusing components. A fuse may blow with a signal that
would not damage the speaker or pass a signal that can damage the speaker.
To protect your system best, advises using adequate, clean amplifier power and
minimizing amplifier clipping. Another option is to add a limiter to your sy stem to
electronically limit damaging transient information.
System Configurations
Unpowered Mixer System
Powered Mixer System
Application Suggestion
MK-12A speakers will work great in combination with B-IN Powered-Series
speak ers.
- MK-12A speakers are used for the main, f ront-of-house speakers
- Power Sub speakers are used to prov ide additional low-f requency power
- Power 10 speakers are used as f loor monitors
Operation
Prior to switching the unit on, turn the v olume control to minimum.
Connect the mains lead to the AC input socket on the rear side. The input
voltage must be 220-240Vac
&
50Hz/60Hz. Switch the neon power switc h to ON
position.
