Resetting the Unit
Press
the “MODE/ESC” button and choose “rEST”(restore). Press “ENTER” to confirm. The unit powers itself down
and then on again for a few seconds. During this time,
the LED display will scroll “rEST” from left to right, after which
normal operation recommences.
Restoring factory defaults
Press
the “MODE/ESC” button and choose “LoAD”(load). Press “ENTER” to confirm. The LED display will change to
“d001” to confirm a factory reset has been completed
Initial start-up
During the warm up time, the unit will auto test itself for a few seconds. During this time the LED display will scroll
“rEST” from left to right .The unit then
start to operate normally
f- DMX Modes
The unit supports 8 and 13 channel DMX Sub-modes from a standard controller. When a suitable DMX connection is
made, the “decimal point” in “d.001” will flash.
Setting DMX Addresses
Use the “MODE/ESC” button to display “d001”, “UP” and “DOWN” buttons allows individual DMX addresses to be
set from “d001” to “d512”
Choosing between DMX Sub-modes
The LED disp
lay shows the chosen control mode when the “MODE” button is pressed. Use “UP” and “DOWN”
buttons to choose the appropriated DMX control Mode
LED Display
DMX Sub-mode
10CH
10Channel
1
5
CH
1
5
channel
Color Options
The Unit offers a range of 16 preset co
lors. These can be individually selected with DMX control and feature in Auto
Run Sound Active modes.
Color Options
Color Preset
White
Yellow
Red
Purple
Dark Green Orange
Dark Blue
Light Green
Light Blue
Pink
Magenta
Brown
Crimson
Gold
Violet
Dark Purple
©Copyright LOTRONIC 2014
LMH360LED
Page 8
